I-10mm Fiber Laser Galvanometer Scanner Head for Fiber Laser Engraving Machine
Izici
1.Isimbobo Sokufaka: 10mm
I-2.Izinga elihle Lomugqa, ukulungiswa okuphezulu ukukhukhuleka okuncane, ukuma okunembile okuphindaphindayo.
I-3.Ukuskena kwejubane eliphezulu, ukusebenza okuzinzile, i-zero drift encane, ukulwa nokuphazanyiswa okuqinile.
4.Uhlelo lokusebenza olubanzi: Ukuchezuka kwe-laser kanye nokwenza kwasendaweni okunezinhlangothi ezimbili
I-5.Fiber laser / CO2 laser / UV laser / 532nm laser iyatholakala
6.Ivolumu emaphakathi, ukusebenza okuzinzile, ikhwalithi ethembekile,
7.Idizayini yemoto yakudala, idizayini ethuthukisiwe yokukhipha ukushisa,
8.Isixhumi esibonakalayo sedijithali esihambisana ne-XY2-100 ejwayelekile,
9.Izinhlelo zokusebenza zakudala, ukuphrinta ilogo yezimpahla zabathengi, ukuphrinta ilogo yomkhiqizo wezimboni.
Isicelo
Isithwebuli se-fiber laser galvo esingu-10mm sifaneleka kakhulu ukumakwa ngesivinini esikhulu.Ububanzi bendawo yesigameko obujwayelekile bungu-10mm.Uhlelo lwe-galvanometer lunezici zero drift, isivinini esisheshayo, usayizi omncane, izinga lokushisa eliphansi kanye nokusebenza okuzinzile nokuthembekile.Inkomba yokusebenza ebanzi yesithwebuli se-galvo isifinyelele ezingeni lochwepheshe lamazwe ngamazwe.
Amapharamitha
| Imbobo ye-Beam yokufaka (mm) | 10 |
| Ubukhulu.i-angle yokuskena | ±12.5° |
| Isivinini sokumaka | 8000mm/s |
| Isikhathi sokuphendula sesinyathelo esincane (ms) | 0.22 |
| Inertia ejikelezayo (g*cm2·±10%) | 0.25 |
| Ubukhulu.I-RMS Yamanje (A/eksisi) | 25 |
| Inani eliphakeme lamanje (A) | 15 |
| I-Zero Drift (μRad./C) | ＜15 |
| I-Scale drift (ppm/C) | ＜50 |
| Umugqa | ≥99.90% |
| Ukuphindaphinda (μRad.) | ＜8 |
| Ukushayela isikhathi eside ngaphezu kwamahora angu-8 (mRad) | ＜0.5 |
| Izinga lokushisa lokusebenza | 25℃±10℃ |
| Isisindo | 1.2kgs |
| Imfuneko yamandla okokufaka (DC) | ±15V @ 5A Max RMS |
| Izinga Lokushisa Lokusebenza | 0 ~ 45℃ |
| Ubukhulu | 115*98*92mm |
